Description
Caractéristiques
Aide/documentation du produit (le cas échéant) :
Fourni avec les modèles (le cas échéant) :
Compatible avec les modèles (le cas échéant) :
Numéro de pièce : FAN2R-RR7078TR-KIT
Numéro de modèle : FAN2R/RR7078TR pour Hampton Bay / HUNTER
Batterie requise (non incluse) : Pile 9 volts
Taille du colis (pouces) : / /
ID FCC (le cas échéant) :
Fréquence (le cas échéant) : 0.0 0.0
Vous aimerez peut-être aussi
Customer Reviews
Industrial fan is from me, have an light kit insert area with the light cap and a harness conector inside a cap, I've putted to the original packaging, my all light kit designed for an Industrial no light, all lights are work fine, the fan is still missing remote and is was missing the reversible wall control, is have empty control options cause the fan is high speed only, fast and high performance is used on high speed, Molex on the remote receiver is still good, wires are inside the cap, included a light cap for no light and remove the light cap is on1y one speed with the wiring adapter inside for the remote and the adapter was unconnected to control is missing control and is run no remote and the fan is only high speed, tested with the remote and the receiver, dimmable bulbs are buyed incandescent for the light kit, Molex still open the light kit is on testing with open vs close video for the fan speed test, no reverse switch make the fan is one direction for my fan, dimmer are fast and the wall switch still on, light still on and the fan is caused by missing remote in manafacturer, paired to an industrial fan in all area and the fan works great and faster speeds and spin is cooling and the switch test video show the single seperated speed still as shown with new because missing remote and the fan is only bad, is works great and the speed is fast and high peformance is good and designed for strong airflow for all wet area.
I was putted on Hampton bay manual/remote switch to run fan speeds, installed in the fan motor pull chain receiver place is created in the factory, light kit is too and in the light kit is have an light shades, reversing button is great and the manual switch is works on my fan and remote is connected to the wire yellow in receiver, light kit is not prepared for connecting receiver, installed fan controller and fan reacts to the speeds, manual switch is used pull chain, remote function and remote switch is for remote only
Conversion kit was remake the original no reverse, I have installed on the Hampton bay Landmark series, two optional receivers installed and tested so great and the speed 3 to speed 1 reverse is great.
Item arrived very quickly. Very well packaged. And brought our 20 plus year old Hunter fan back to live. Went through 3 receivers in our old Hunter fan . All melted. Found out they couldn’t handle anything over 75 watt bulbs. Had to cut tabs down a little but after grinding tabs fit in house easier than original.Thanks Dan Electric . 👍🏻
This customer rated this item 5 out of 5 stars (left no comment).