The Anderic FAN28R-UD is a canopy-mounted receiver for 3-speed AC ceiling fans with separate up and down lights.
Specifications
- Shipped receiver: Anderic FAN28R-UD
- Radio frequency (RF)
Good to Know
- It works with the FAN-HD remote with up and down light keys and the RR7078TUDL. The remote is sold separately.
- It is wired into the fan canopy. Turn off power at the circuit breaker or fuse box before opening the fan canopy or housing. A qualified electrician is recommended.
Setup / Pairing
Installing the FAN28R-UD receiver
WARNING: High voltage. Household electrical power can cause serious injury or death. Disconnect power to the ceiling fan by removing the fuse or switching off the circuit breaker.
- Remove the ceiling fan canopy from the mounting bracket.
- Disconnect the existing wiring between the ceiling fan and the supply at the junction box. If you are replacing a receiver, disconnect all of its wires.
- Lay the black antenna wire on top of the receiver and put the receiver in the mounting bracket.
- Make these connections with the supplied wire nuts: black receiver wire (AC IN L) to black supply wire; white receiver wire (AC IN N) to white supply wire; white receiver wire (TO MOTOR N) to white fan wire; black receiver wire (TO MOTOR L) to black fan wire; blue receiver wire (FOR DOWN LIGHT) to blue fan wire; red receiver wire (FOR UPPER LIGHT) to red fan wire.
- Push all connected wires up into the junction box.
- Reinstall the canopy on the mounting bracket.
- Restore the electrical power.
Setting the codes
- Before reinstalling the fan housing or canopy, note the dip switch pattern on the FAN28R-UD receiver (or set it to the pattern you want).
- On the remote, slide the 4 dip switches up or down. The factory setting is all switches up; we recommend using a different combination.
- Set the switches on the remote to EXACTLY match the switches on the FAN28R-UD receiver. The remote and receiver will only work together when both patterns are the same.
- Restore power and test the fan and light.
What's in the Box
- 1 Anderic FAN28R-UD receiver
Compatible Models
- Hampton Bay and other 3-speed AC ceiling fans with up and down lights used with FAN-HD or RR7078TUDL remotes
Before ordering, check the model or part number printed on your old remote (usually on the back) and compare it to this list.