Description
The Anderic UC7051RKIT is a ceiling fan remote and receiver kit for 3-speed fans: an RR7078TR remote and a reversing receiver that pair by matching 4 dip switches on 304 MHz. It replaces RR7078TR/UC7051R.
Specifications
- Kit: Anderic UC7051RKIT
- Radio frequency (RF): 303.835 MHz
- Battery: 1 9-volt (not included)
Good to Know
- If your fan has an AMP-type plug instead of the 9-pin square (Molex) plug, an adapter cable is needed.
Setup / Pairing
A new kit comes with the remote and receiver already set to matching patterns. Check that both patterns match before closing the fan.
Installing the receiver
- A qualified electrician is recommended. Disconnect the fan from power at the wall switch (and breaker) before you begin.
- Open the fan housing to reach the old receiver (see the fan's instructions). Unplug the old receiver and remove it, keeping its screws.
- Plug the fan's 9-pin square plug into the new receiver until it clicks into place.
- If you have a light kit, connect the blue and white light wires. If the plugs do not fit, cut off the plugs and join the wires with wire nuts.
- Secure the receiver with the screws and reinstall the housing.
Setting the codes
- Before reinstalling the fan housing or canopy, note the dip switch pattern on the UC7051R receiver (or set it to the pattern you want).
- On the remote, remove the battery cover and slide the 4 dip switches up or down. The factory setting is all switches up; we recommend using a different combination.
- Set the switches on the remote to EXACTLY match the switches on the UC7051R receiver. The remote and receiver will only work together when both patterns are the same.
- Replace the battery cover, restore power and test the fan and light.
Safety: turn off power at the circuit breaker before opening the fan canopy or touching the receiver.
What's in the Box
- 1 remote and 1 receiver
- Battery not included
Also see: setup guide
Compatible Models
- 3-speed ceiling fans that use a FAN2R or UC7051R receiver and a Hampton Bay UC7078T / CHQ7078T style remote
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- Works with 3-speed ceiling fans that use a FAN2R or UC7051R receiver and a Hampton Bay UC7078T / CHQ7078T style remote.
- Plug in the UC7051R receiver, then check the remote's 4 dip switches match it; step-by-step instructions are in the description.
- Receiver with a plug-in 9-pin square connector and blue/white light-kit wires.
- Remote keys, light on/off (press and hold to dim), fan speeds LO, MED and HI, fan OFF and Reverse.
- Takes 1 9-volt battery, not included.
Part/Model Number: UC7051RKIT / UC7051RKIT
Power Information: 1 9-Volt Required, Not Included
FCC ID (if applicable): CHQ7078T
Frequency (if applicable): 303.835 MHz
Compatible with models (if applicable): FAN2R, UC7051R, UC7078T, CHQ7078T, RR7078TR
Compatible Substitutes and Related Products
- 5 stars: 114 (86%)
- 4 stars: 16 (12%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 2 (2%)
Working great
Hi Don, thanks for the great review! Glad to hear the receiver is working well for you.
The part was exactly as described. It arrived on the date I was told it would. Excellent service.
It replaced one that went bad after at least 5 years. (I don't know how many because it was present when I bought the house.) Works as good as new.
Exact match to existing. Easy install
I needed a remote kit replacement for my 2004 era Hunter Grand Lodge ceiling fan/light and this remote receiver worked flawlessly. It came with a 9 pin port which fit the connector on the fan, no adapter needed. I had it up and running in 10 minutes. I used wire nuts on the light socket wires. I wrote a more detailed review on Amazon.
Thank you for leaving such a detailed review! We’re glad to hear the remote replacement worked flawlessly with your Hunter ceiling fan and that installation was quick and easy with no adapter needed. We truly appreciate you sharing your experience and taking the time to write a detailed review on Amazon as well. Your feedback means a lot to us!
I had to do a little modification to make it fit correctly but really worked great.
Fast delivery and the correct part for my Regency fan
We’re happy to hear your Regency fan is back up and running! Thanks for your feedback and for choosing Anderic!!
The replacement controller for a ceiling fan with light worked perfectly
Tech support did a great job being certain I was ordering the right part, they expedited it, shipping was no additional cost and they did everything they said they would, were friendly and very helpful — a totally satisfied customer!
Perfect replacement for my hunter fan. I prefer this remote also as the fan speed is labeled high, medium and low instead of 1, 2, 3.
Perfect replacement for my hunter fan. I prefer this remote also as the fan speed is labeled high, medium and low instead of 1, 2, 3.
Exactly what I was looking for. Arrived in a timely fashion considering it from the USA to Canada Thank you.
Great
Exact match and works great
We bought a cabin with a bunch of older ceiling fans. The internal remotes had clearly overheated and melted. I have purchased 4 of these so far and they are working great!
Delivered super fast and works as promised. Easy to install. Must read directions...
The exact part I needed. Shipping was fast too.
This customer rated this item 4 out of 5 stars (left no comment).
best I could find the uplight work open would be nice if I could get it to work.
Every thing is working fine. Installed easily. Thank you for the speedy service.
James W. Walsh. [****]
Replaced my old fan receiver and it's been working perfectly!
This was an exact replacement for my current unit and was easy to install. Worked perfectly.
Got the replacement on time and work perfectly. Fan was not moving to high speed.
Excelente producto , enviado en una forma rapida
estoy contento con el producto
all had to d was unplug plug in put screw back in works like a top
It works better than the original actually with one exception the wire on one was opposite of what mine had no problem I took the old one and replaced it with the one I needed.
It’s working great! Thanks!
Fast delivery. Easy to install and fixed my problem with my ceiling fan
Works as expected, easy installation.
This customer rated this item 5 out of 5 stars (left no comment).
Bought an extra for a 2nd matching fan so that replacement of the receiver & remote for the other 1st fan can be operated by a single remote. Works great







