Description
The Anderic UC7051GKIT is a ceiling fan remote and receiver kit: an RR7080T remote and a UC7051G receiver that pair by matching 4 dip switches on 304 MHz.
Specifications
- Kit: Anderic UC7051GKIT
- Radio frequency (RF): 303.835 MHz
- Battery: 1 9-Volt (not included)
- UC7051G receiver with a plug-in 9-pin square connector and light-kit wires
Good to Know
- If your fan has an AMP-type plug instead of the 9-pin square (Molex) plug, an adapter cable is needed.
Setup / Pairing
A new kit comes with the remote and receiver already set to matching patterns. Check that both patterns match before closing the fan.
Installing the receiver
- A qualified electrician is recommended. Disconnect the fan from power at the wall switch (and breaker) before you begin.
- Open the fan housing to reach the old receiver (see the fan's instructions). Unplug the old receiver and remove it, keeping its screws.
- Plug the fan's 9-pin square plug into the new receiver until it clicks into place.
- If you have a light kit, connect the blue and white light wires. If the plugs do not fit, cut off the plugs and join the wires with wire nuts.
- Secure the receiver with the screws and reinstall the housing.
Setting the codes
- Before reinstalling the fan housing or canopy, note the dip switch pattern on the UC7051G receiver (or set it to the pattern you want).
- On the remote, remove the battery cover and slide the 4 dip switches up or down. The factory setting is all switches up; we recommend using a different combination.
- Set the switches on the remote to EXACTLY match the switches on the UC7051G receiver. The remote and receiver will only work together when both patterns are the same.
- Replace the battery cover, restore power and test the fan and light.
Safety: turn off power at the circuit breaker before opening the fan canopy or touching the receiver.
What's in the Box
- 1 remote and 1 receiver
- Battery not included
Compatible Models
- ceiling fans that use a UC7051G receiver
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- A ceiling fan remote and receiver kit with an RR7080T remote and a UC7051G receiver that pair by matching 4 dip switches on 304 MHz.
- Plug in the UC7051G receiver, then check the remote's 4 dip switches match it; step-by-step instructions are in the description.
- UC7051G receiver with a plug-in 9-pin square connector and light-kit wires and RR7080T remote, the matching remote for the UC7051G. This all-in-one kit restores full fan functionality when your existing receiver has failed, giving you reliable control over fan speed, light dimming, upper lights, and reverse operation.
- REVERSE key on the RR7080T toggles fan direction; the UC7051G receiver has reversing built in. Three fan speeds, forward and reverse airflow, and dimmable lighting.
- The Anderic UC7051GKIT is the complete replacement solution for Hampton Bay ceiling fans requiring the UC7051G receiver.
Part/Model Number: UC7051GKIT / UC7051GKIT
Power Information: 1 9-Volt Required, Not Included
FCC ID (if applicable): CHQ7078T
Frequency (if applicable): 303.835 MHz
Compatible with models (if applicable): UC7051G
Compatible Substitutes and Related Products
- 5 stars: 367 (94%)
- 4 stars: 15 (4%)
- 3 stars: 3 (1%)
- 2 stars: 1 (0%)
- 1 star: 5 (1%)
Came quickly and the remote for the ceiling fan worked perfectly... have ordered from this company before
Hi Regina, thank you for your lovely review! We're glad the remote worked perfectly and appreciate your business.
Aydan was very helpful. He had the perfect remote that was a replacement for my 18 year old Regency fan! It work after adjusting the code that was in the old remote and plugging in a battery.
Hi Arlene, we're so glad Aydan could help you find the perfect replacement remote! Thanks for sharing your experience!!
I was not sure I would find a remote for my 2 decade cold ceiling fan. The shipping was fast and the remote was easy to program. It is nice to utilize all the functionality of the fan effortlessly once again. I highly recommend!
It worked
Works well. Need to get in right position
When I purchased my remote it was stated that I could go to the site and download an instruction manual for operating the updated remote ....according to the website....No such Manual Exists....
Received parts quickly and parts worked great, very satisfied.
Hi there! We're so happy to hear that you're satisfied with your purchase and that everything worked great. Thank you for sharing your experience!
Great replacement remote for my Hampton Bay ceiling fan. Works (and looks) as well as the original remote did.
This worked perfectly. Copied the code from the old remote and it worked immediately.
The new remote didn't fix my problem but your service was excellent. Received what I purchased and it was delivered on time! .
Great selection of parts available for differing brands of ceiling fans, as well as ceiling fan remotes. They had exactly what I needed, and I appreciate their knowledge of their products when I spoke with them on the phone. Fast shipping too.
Worked like a charm
I ordered a wireless wall unit, and received a wired instead. Tried to connect with the sales team and sent 2 emails, no response. I would expect different from a customer focused organization.
Worked perfect
I'm converting a hard wired wall remote to a wireless wall remote. When I used the QR code I ecpected to see a instalation manual. I was wrong. I will be sending it back. I asked your chat bot and got nothing
Perfect
Very well satisfied with the remote.. it works perfectly
Thank you for taking the time to leave a review! We’re glad to hear that you’re very satisfied with the remote and that it’s working perfectly for you. We truly appreciate your support and hope you continue to enjoy it! If you ever need assistance in the future, we’re always happy to help.
It was easy to order and set up. Thank you.
Received the remote in a timely manor. However when I tried to use it it didn't work. Then I saw the dip switches and matched them to the configuration of the old remote. Works well now
Anderic CHQ7080T / UC7080T with Up/Down/Rev for Hampton Bay Ceiling Fan - Remote Control - RR7080T
Easy to set up. Works great!
Anderic CHQ7080T / UC7080T with Up/Down/Rev for Hampton Bay Ceiling Fan - Remote Control - RR7080T
The easiest replacement of any thing I've ever replaced. Literally put a battery in it and it worked! Beyond impressed; a little mustard seed of faith in consumerism was restored with this transaction. 10 stars!🌟 thank you!!!!
I would like to say your customer service is excellent!!!!!
I have an older fan and the manufacturer has gone out of business.
I was very fortunate to speak with DALTON at your company and after asking me some basic questions, he was able to find the remote control part I was looking for. That made my day. I just installed the remote and it works Perfectly. Thank you very much, Dalton
Bryan
Could not find installation instructions. Set switches as on original remote. All but dimming worked. Lights go on or off but dimming doesn’t work. All three fan spreeds work as does off switch.
works great like the control that came with the fan except it does not change the light from dim to bright. Happy with it.
great replacement product, but more importantly. amazing customer support...
Remote works great and ordering was easy.
Works great








