Description
The Anderic DC1-DC8-KIT is a substitute for the Monte Carlo R8Y7RC04-CF Visual Comfort ceiling fan remote (7rc04-cf100001). It includes the Anderic DC1 remote and the DC8 receiver.
Specifications
- Shipped kit: Anderic DC1-DC8-KIT (DC1 remote and DC8 receiver)
- Radio frequency (RF): 2.4 GHz
- Batteries: 2 AAA (not included)
- Operating range: approximately 10 meters
Good to Know
- It comes with its own receiver and remote; the existing receiver and remote are not used.
- The receiver is wired into the fan; switch off the power at the circuit breaker before installing it.
- Do not use a wall dimmer switch to control the fan speed.
- Key names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.
- The remote is preset with light dimming enabled. Use the DIM setting to dim, or the ON setting for on/off only.
- We may ship the newest model of this kit.
Setup / Pairing
- Remove the battery cover on the DC1 remote and install 2 AAA batteries (not included), matching the polarity, then replace the cover.
- Switch the power off at the circuit breaker before installing the receiver. Make the wiring connections as shown in the User Guide, then restore power.
- Choose the mode with the dip (code) switch on the DC1 remote. Universal mode: set it to the upper COMMON CODE position; the remote is then ready to use. Other remotes in the same setting can also control the fan.
- Learning mode (to pair one specific remote): set the switch to the lower L. CODE position. Turn the fan power off at the circuit breaker for at least 10 seconds, then turn it back on.
- Within 60 seconds of restoring power, press and hold LEARN for at least 3 seconds. After power is restored, do not press any other button before LEARN, or pairing will fail.
- If the fan has a light, it blinks twice when pairing is complete. For a fan without a light, test with the remote. If it does not pair, turn the power off and repeat. A fan can be controlled by up to two remotes. See the User Guide for full instructions.
What's in the Box
- 1 Anderic DC1 remote
- 1 Anderic DC8 receiver
- Wall mount cradle
- Batteries not included
Compatible Models
- Monte Carlo R8Y7RC04-CF
- 7rc04-cf100001
- Monte Carlo fans that used the R8Y7RC04-CF remote, including 3MNLR56 and 3MNLR72, and others.
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare the photos and button layout to your current remote. If you are not sure, contact us with your model or a photo of the original remote.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- The Anderic DC1-DC8-KIT is a substitute for the Monte Carlo R8Y7RC04-CF Visual Comfort ceiling fan remote (7rc04-cf100001). It includes the DC1 remote and the DC8 receiver.
- With the breaker off, wire in the DC8 receiver, restore power, then set the DC1 dip switch to COMMON CODE, or to L. CODE and hold LEARN for at least 3 seconds within 60 seconds. Step-by-step instructions are in the description.
- Radio frequency (RF), 2.4 GHz. Six fan speeds, fan off, forward/reverse and light dimming. The kit uses its own receiver and remote; the original receiver and remote are not used.
- Key names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering. Do not use a wall dimmer switch to control the fan speed.
- Takes 2 AAA batteries, not included.
Part/Model Number: 7rc04cf100001 / 7rc04-cf100001 Visual Comfort
Power Information: 2 AAA Required, Not Included
FCC ID (if applicable): 7rc04-cf100001 2.4 Ghz
Frequency (if applicable): 2410.0 MHz
Compatible with models (if applicable): R8Y7RC04-CF, 7rc04-cf100001, 3MNLR56, 3MNLR72
Compatible Substitutes and Related Products
- 5 stars: 48 (79%)
- 4 stars: 5 (8%)
- 3 stars: 1 (2%)
- 2 stars: 3 (5%)
- 1 star: 4 (7%)
Easy to order. Arrived on time. Installed in no time.
Hi Jamea, thanks for the great review! We’re glad ordering was easy, your receiver arrived on time, and installation was quick. Enjoy your ceiling fan!
The fan kit arrived in about one week. Packaging was good. It was installed without issue and now my ceiling fan is up and running again. Good customer service.
Hi Mary, thank you for sharing your positive experience! We're glad the fan kit worked well and that you're happy with the service.
The gyy on the phone was so helpful. We really appreciated him. Received our product quickly and it is installed.
Hi Jeannie, we're so glad to hear that our team was helpful and that you're happy with your new fan kit! Thanks for sharing your experience.
Prompt and helpful thanks
As advertised. Fan stopped working. Replaced the controller and works as new. No issues with using the original remote.
Perfect fit, easy hook up. Works great!
First:
This unit is a solution to the MinkeAire ceiling fan remote which reverses direction.
Minke stopped making those other one, but these guys built a good unit. Just installed it for a client and it works great.
Second:
I think it is more valuable to see how a company behaves when things do not go perfectly. This company had a problem and they went out of their way to make it right.
Their warehouse packer send only half my order.
I reached out by email and later I got a call from what felt to me to be the owner. He explained their issue, and how the replacement would be handled.
The personal touch is why I am writing this review.
Well done, sir.
Installed and works, fixed the problem
I'll be calling u, I ordered a remote celling fan kit. U didn't send a remote to go with.
The remote works as expected. The issue was it took about 3 weeks to get it. There was no communication from the company that the remote was not available at the time of purchase. The only communication was initiated by me. In my opinion, this is very unprofessional
Easy to install per simple instructions provided.
Hi Todd, we're glad to hear the installation was straightforward for you! Thanks for sharing your experience.
Parts delivered in 2 weeks . Worked great!! Easy installation and so much less expensive than buying a new fan.
Hi there! We're so glad to hear the parts arrived quickly and worked well for you. Thanks for choosing Anderic, and enjoy your fan!
Worked perfectly and fast delivery
Received in a timely manner
Electrician installed part and all went well.
Great customer service!! Works perfectly.
Exactly what I needed.
Thank you for leaving a review! We’re glad to hear it was exactly what you needed. We truly appreciate your feedback and support.
Can't review because I have not had it installed yet.
The wiring and the receiver hooked up fine. But the bad part is that the fan now has only about 40% of its fan speed. We have two identical fans, but now this one is only less than half of the speed.
My receiver arrived in a timely manner and installed easily. Works absolutely perfect.
Glad to hear your receiver arrived quickly and was easy to install! We’re thrilled it’s working perfectly for you. Thanks for choosing Anderic!
This new receiver speeds does not match the old receiver. It is much slower.
The highest level only matches the middle speed.
We’re so sorry to hear about the issue with your new receiver’s speed settings. If you’re still experiencing this problem, please give us a call at 1-855-573-6683, and our support team will be happy to assist you in getting it resolved.
The receiver that came with the fan would not fit because my ceiling was sloped 24 degrees. Your receiver fit and worked great
The fan receiver arrived quickly and was a perfect match. Very happy with the service from Anderic.
It was not the part I needed to fix the problem. Granted, I was the one troubleshooting the issue with the fan, but now I’m just buying a new fan and I’m out another $80 because I can’t get a refund on this capacitor I ordered. I’m sure this is a fine place to buy parts you need through, but I’m not happy not being able to return a product I bought by mistake.
My Monte Carlo windmill 62” fan would make clunking noises when I turned it on but the noise would go away if the light was on. Eventually it would not turn. I debated replacing the controller with the same model number DC8-62 or the DC8-96. I chose the 96 and so far it is working like new. The original controller lasted only 3years which is not that impressive for the retail cost of the fan.
Just what i expected - easy to replace the old (non-functioning) receiver and now the fan is working as designed.
Excellent service.
Thank you for taking the time to share your feedback! We truly appreciate your kind words and support.
Although there is no given information stating that the model number I gave on my order was not the one that I did/ would receive. After calling and speaking to tech support it was verified it is an exact replacement. Once installed, it works great.














