This is a Minka-Aire AireControl RC210 3-speed handheld ceiling fan remote with a reverse key.
How to confirm the fit
Find the FCC ID on the back of your old remote or inside its battery compartment. It should match Y7ZDL2101T. If your remote shows a different FCC ID, this remote will not work with your fan's receiver.
Specifications
- Radio frequency (RF): 304 MHz
- FCC ID: Y7ZDL2101T
- Battery: 1 A23 (not included)
Good to Know
- The remote's frequency switches must be set to the same positions as the receiver's.
Setup / Pairing
Before any receiver or canopy access, isolate power at the breaker. Set the handheld DIP switches to match the isolated receiver; close and reassemble all housings before restoring power. Mains access is not required when you are only matching a known handheld pattern.
- Remove the battery cover and check that the four frequency switches match the switches on your fan's receiver or old remote.
- Install the A23 (12V) battery, which is not included, matching the polarity marks.
- Replace the cover and test the fan and light.
What's in the Box
- 1 Minka-Aire RC210 remote
- Wall mount bracket
- Battery not included
Compatible Models
- Minka-Aire RC210 (DL-2101T)
- Other part numbers: Y7ZDL2101T
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.